Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Miami
Window installation in Miami means one thing before anything else: the window has to carry a Miami-Dade Notice of Acceptance. Without that NOA, the permit desk rejects the application and the job stops before it starts. TruePane Windows & Doors handles NOA-compliant impact window installation across Miami, from Kendall to Little Havana to the Upper East Side. We measure twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. Call (561) 489-4036 for a free in-home measure and a written quote.
Why TruePane Windows & Doors Is Miami’s Preferred Window Installation Company
We’re a second-generation glazier’s shop, not a franchise playbook with a rotating crew. Dale Kessler founded TruePane in 2008 on a rule that still sits on the whiteboard: if the pane is not true, the job is not done. That applies to a fogged single-hung in Hialeah and a full impact retrofit in Coral Gables the same way.
Miami homeowners deal with a specific set of problems: salt air eating standard anodized aluminum, humidity stressing IGU seals, and permit offices that want design pressure calculations and NOA documentation for every opening. Our crews work in Miami every week. We know which product lines clear the Miami-Dade permit desk and which ones get sent back. We have been through hundreds of Miami inspections, and we know what the inspectors look for before the fastener goes in.
Every TruePane technician is background-checked and uniformed. Every job is covered by the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, no arguing. A live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form. Call (561) 489-4036 and you get a person.
Our Window Installation Services in Miami
We install and replace windows of every configuration, but three styles dominate Miami’s housing stock. Here is how we handle each one.
Horizontal Roller Windows
Horizontal roller windows are the workhorse of 1950s-1980s CBS construction in Miami. Original single-pane aluminum sliders from that era are almost always set directly into the block with no wood buck, which means a standard replacement with a big box retrofit flange will not sit right. In Kendall and Westchester we regularly cut out old frames and anchor new PGT or ES Windows horizontal rollers into the masonry with epoxy-set stainless anchors. That is the difference between a window that stays square and one that binds by August.
Casement Windows
Casement windows seal tighter than sliders because the sash compresses the weatherstripping when cranked shut. In Miami’s wind zones, that matters. A properly installed impact casement from PGT WinGuard or CGI carries an HVHZ design pressure rating, and the crank mechanism holds the sash against the frame instead of relying on a sliding track. We install a lot of casements in Coral Gables and Coconut Grove where homeowners want impact protection without losing ventilation.
3-Panel Sliding (3-Lite Roller) Windows
Three-panel sliders are common in Miami’s mid-century ranches and 1960s split-levels, especially where a wide opening faces a patio or a canal. These openings demand careful measurement because the existing opening in a concrete block wall was often roughed in generously and patched with mortar. We order panels sized to the actual rough opening, not the old frame, and we anchor the new track into sound block, not the crumbled mortar bed at the edges. Whole-home packages with these units run higher because each 3-lite is effectively three windows in one frame.
Single & Double Hung Windows
Single and double hung windows show up most often in Miami’s two-story CBS homes and in replacements where the homeowner wants to keep the original divided-light look. Impact-rated hung windows are heavier than standard vinyl, and the spring balances have to be sized for the added sash weight. We see installers spec standard balances and the sash drops within a month. TruePane orders the correct balance for the unit, every time. No surprise line items on the bill, no second appointment left hanging.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Miami
We are an authorized installer for more than a dozen manufacturer lines, and we quote them side by side on paper so you see exactly what you are buying. In Miami, that usually means PGT for impact single-hung and casement work, CGI for high-design-pressure openings near the coast, and ES Windows for thermally broken aluminum where the budget allows. We do not push one brand. We show you the NOA, the design pressure rating, the frame alloy, and the finish, then let you decide. Local stock and Miami-Dade NOA documentation are part of every quote.
Common Window Installation Problems We See in Miami Homes
- Permit rejected because the window has no Miami-Dade NOA. A Florida Product Approval number is not enough in Miami-Dade County. The proposed window must carry a Miami-Dade Notice of Acceptance, and we check that on every product before it goes into the quote. A cheap bid that cannot produce the NOA stalls at the permit desk.
- Salt air pitting standard anodized aluminum frames. Homes within a few miles of Biscayne Bay or the Atlantic see measurable frame corrosion in three to five years on standard finishes. We spec marine-grade or upgraded anodized finishes on coastal Miami jobs because replacing the frame is a second install you should never have to pay for.
- IGU seal failure from humidity and aggressive AC. Non-impact replacements with standard insulated glass units fog within the first year in Miami more often than anywhere else in Florida. The combination of year-round humidity and cold interior AC creates constant thermal stress on the seal. Impact-rated units from PGT and CGI use seal systems designed for that load.
- Frames set directly in block with no buck. Pre-1994 CBS homes in Kendall, Hialeah, and Little Havana often have original windows set straight into the concrete, no wood buck, no flashing. A standard replacement will not anchor properly. We use masonry-specific anchoring and epoxy-set stainless fasteners on these openings, and the permit file shows the anchor schedule.
Pricing for Window Installation in Miami, FL
A typical impact window in Miami runs $800 to $1,500 per window installed. Impact single-hung units run $900 to $1,800 per window. Large or custom openings, including 3-panel sliders and oversized fixed windows, run $2,500 to $5,000 per opening. Whole-home packages start around $8,000 and go past $25,000 depending on opening count, wind zone, floor height, and frame material.
What moves the price in Miami specifically: openings above the ninth floor require higher design pressure ratings, coastal wind zones cost more than inland zones, and CBS block homes need masonry anchoring and often concrete repair around the rough opening. Every TruePane quote includes the permit fee, the NOA documentation, the anchor schedule, and the inspection. Call (561) 489-4036 for a free in-home measure and a written quote.
What Window Installation Costs in Miami
If you are pricing a whole-home impact window replacement in Miami, plan on $8,000 to $25,000 or more. The range is wide because Miami housing stock is not uniform: a 1958 CBS ranch in Westchester with ten openings and no buck will cost differently than a 1980s two-story in Kendall with standard wood bucks, and a Miami Beach Art Deco condo with preservation requirements will cost differently than both.
Here is the honest math. Impact windows generally run $800 to $1,500 per window installed. Impact single-hung units run $900 to $1,800. Large or custom openings, including 3-panel sliders, bay configurations, and oversized fixed windows, run $2,500 to $5,000 per opening. Whole-home packages start around $8,000 and go past $25,000 depending on opening count, wind zone, floor height, and frame material. The free in-home measure and written quote pin down your exact number. Call (561) 489-4036 to schedule it.
Florida Pays You Back
Miami homeowners can stack several incentives on an impact window job, and we document every opening so you can file correctly. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit returns 30% of the product cost on qualifying units, up to $600 per year. And after a wind-mitigation inspection ($75 to $150), most Miami carriers apply a windstorm-premium credit averaging around 25% on the windstorm portion of the policy. No guarantees; programs and carriers set the final numbers. But the documentation from a compliant install is what makes the credit possible in the first place.
One comparison worth making before you commit: impact windows versus hurricane shutters. Shutters meet code, but someone has to put them up before every storm, and they do nothing for energy efficiency, noise, or daily light between storms. Impact windows are permanent protection. No panels in the garage, no panic at 6 p.m. when the track shifts. If you want the lower insurance premium and the daily comfort, impact is the way to go. TruePane installs impact windows and doors only; we do not sell or install shutters.
We Also Serve Cities Near Miami
TruePane serves Miami and the surrounding communities, including Miami Beach, Coral Gables, Hialeah, and Miami Gardens. If you are in one of those cities, the same NOA-compliant product set and the same Done Right Promise applies. See our Window Installation in Miami coverage for specifics, or call (561) 489-4036 and ask for the crew schedule in your area.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Miami
Every impact window in Miami-Dade County must carry a Miami-Dade Notice of Acceptance. Florida Product Approval alone is not enough here. This is the only county in Florida that mandates the Large Missile Impact Test regardless of design pressure rating. Neighboring Broward and Palm Beach accept Florida Product Approval alone, so a compliant Miami window list is much shorter and county-specific. If a quote lists a window with only a Florida Product Approval number, the permit desk will reject it. Call (561) 489-4036 and we will check the NOA on every product before it goes into your quote.
The Miami-Dade inspector verifies the NOA number against the product label on the installed window and confirms the anchoring method matches the approved product drawing. In many cases the inspector also checks the design pressure calculation for the specific opening and floor height. Broward inspections are less demanding on product documentation. If the label does not match the NOA, the installation fails, and you wait for a re-inspection. We photograph every label and keep the NOA on file before the inspector arrives.
Window replacement in Miami requires its own permit, not a general repair permit. The Miami-Dade permit application requires the NOA for each product, the design pressure calculations, and in many cases an anchor schedule for masonry openings. We pull the permit, schedule the inspection, and make sure the final passed inspection is on file. That passed inspection is what supports the wind-mitigation credit on your insurance policy. Call (561) 489-4036 for an exact quote on your openings.
Because the original frames in those 1950s CBS homes are often set directly into the block with no wood buck. A standard retrofit flange will not anchor properly, and a contractor who does not carry masonry bits and epoxy will either refuse the job or do it wrong. We anchor into sound block with epoxy-set stainless fasteners and document the anchor schedule in the permit file. That is the only way the window stays true and the inspection passes clean. If a Kendall contractor says they will not touch your concrete block home, call (561) 489-4036; we measure it twice and give you a written quote.
Not usually. Miami Beach’s Historic Preservation Board, covering roughly 5th to 23rd Streets on the barrier island, often requires replacement windows to match the original 1930s-1940s steel casement profiles. Standard aluminum impact product lines get rejected because they do not replicate the slim sightlines. You need specialty impact-rated steel or thermally broken aluminum profiles that most suburban-market reps do not stock. TruePane sources those profiles and handles the preservation review paperwork as part of the job. Call (561) 489-4036 for Miami Beach historic district window replacement.
Call TruePane Windows & Doors for Your Miami Window Installation
If you live in Miami and you want the window done right, with the NOA on file, the permit pulled, the inspection passed, and both warranty layers registered in writing before the truck leaves your driveway, call (561) 489-4036. Ask for a free in-home measure and a written quote. A live person answers, 24 hours a day, 7 days a week. You will get straight answers about your openings, your wind zone, and what a compliant Miami quote includes that a cheap one leaves out.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami and South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.