Picture & Fixed Windows

Picture & Fixed Windows in Miami, FL | TruePane Windows & Doors

Picture & Fixed Windows are non-operable impact glass panels built to frame the view without a single moving part in the way. In Miami, where hurricane code drives nearly every window decision, these units give architects and homeowners the clean sightlines they want with the Miami-Dade NOA documentation the building department asks for. They’re the window you choose when the view is the point. TruePane Windows & Doors installs Picture & Fixed Windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, set level and square per AAMA 2400/2410 practice. Call (561) 489-4036 to talk about your project.

Call (561) 489-4036

Product Overview - Picture & Fixed Windows

Picture & Fixed Windows are exactly what the name says: fixed panels that don’t open, tilt, or slide. What you lose in ventilation you gain in glass area, and in Miami that trade-off usually favors the view. These units are often paired with operable windows on either side, a combination we install all over Miami, Coral Gables, Pinecrest, and the coastal neighborhoods where long horizontal sightlines matter.

The product earns its place in hurricane-prone construction through the laminated glass itself. The PVB interlayer inside the glass holds the pane in the frame under impact, which is the core requirement for any HVHZ-rated opening. Aluminum and vinyl frame options let the panel carry significant glass weight without sagging or bowing over time, and the fixed profile means there’s no hardware to wear out, no track to clog with salt and sand, and no seal to lose its compression the way operable units do after years of cycling. For a home on Biscayne Bay or a condo line in Brickell, a fixed picture window with a Miami-Dade NOA is often the simplest way to satisfy the permit reviewer and get the view the owner actually wants.

Technical Specifications

Every Picture & Fixed Window we quote is configured to the opening, the wind zone, and the design pressure printed on the permit set. Here’s what the product line offers:

• Frame materials: Aluminum or vinyl, selected for the structural loads of the specific elevation
• Maximum panel size: Up to 120″ wide, subject to design pressure for your wind zone
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass
• Finish options: White, almond, bronze, black, and tan
• Operation: Non-operable, fixed in place
• Pairing: Commonly flanked by operable impact units on one or both sides

No two openings in Miami take the same size and pressure rating, so we quote every panel from the actual NOA and Florida Product Approval documentation for that specific configuration. Call (561) 489-4036 with your rough opening sizes and we’ll tell you what’s achievable.

Hurricane & Compliance Performance

Laminated Impact Glass. Two panes of glass bonded to a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack but the interlayer holds the pane in the frame, keeping wind and driven rain out of the building envelope. This is the foundation of HVHZ-rated protection.

Miami-Dade NOA / Florida Product Approval. Every Picture & Fixed Window configuration carries a Miami-Dade Notice of Acceptance or Florida Product Approval number. These are issued per configuration, not per product line, so we verify the exact number on your specific quote before we ever submit a permit package.

FBC / HVHZ Compliance. TruePane Windows & Doors supplies Picture & Fixed Windows engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Miami-Dade and Broward permit reviewers expect HVHZ documentation, and these units are built for that review.

TAS 201 / 202 / 203 Testing Context. HVHZ-rated products are tested under TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). These are the protocol family the Florida Building Code references, not optional extras.

Design Pressure Matched to Your Wind Zone. Design pressures are matched to your wind zone, up to +/-100, never higher. We don’t oversell PSF ratings a panel doesn’t need. The number that matters is the one on your permit set and structural calculations, and we quote to it.

Energy Performance Options. Low-E and insulated glass options are available on Picture & Fixed Windows for energy performance. In Miami’s heat and UV exposure, the right Low-E coating makes a noticeable difference in interior comfort and protects furnishings from fade.

Color & Glass Options

White, almond, bronze, black, and tan finishes cover the range of Miami architecture we work in every week. White and almond sit naturally on Key Biscayne and Coconut Grove frame-style homes and Mediterranean elevations. Bronze and black carry the contemporary look you see in Edgewater condos, newer South Miami builds, and the darker metal-and-glass facades going up along the coast. Tan bridges the two, a quieter neutral that disappears on stucco walls with warm tones.

On the glass side, clear laminated is the default for maximum visible light and the truest view, which is usually what a picture window is for in the first place. Tinted glass cuts glare on east- and west-facing elevations, which Miami has no shortage of. Low-E insulated glass is the upgrade we suggest when the panel faces direct afternoon sun and the owner wants indoor comfort to match the view. Every option stays within the same impact-rated, NOA-backed product family, so the design choice never forces a compromise on code compliance.

Installation by TruePane Windows & Doors in Miami

We install Picture & Fixed Windows in Miami the way the product documentation requires: as a system, not as a pane dropped into old framing. Every job starts with a pre-install inspection of the rough opening. We check that the opening structure is sound, the dimensions match the quote, and the surrounding stucco or block is in condition to receive the new frame. Coastal exposure in neighborhoods like Key Biscayne, North Bay Village, and Miami Shores puts salt air into older openings, and we find hidden rot or spalling more often than owners expect.

The frame goes in level, plumb, and square. That’s not a slogan; it’s the physical requirement for the glass to seat correctly and for the anchor points to load evenly when wind pressure hits. We use low-expansion foam perimeter sealant per AAMA 812 installation practice, then flash and seal to AAMA 2400/2410 standard. The panel gets set, shimmed as its size demands, and anchored to the elevations required by the design pressure on your permit set. We finish with a water test before the trim goes back on, then clean the job site and walk the opening with the owner.

Permitting in HVHZ jurisdictions is a condition of doing this work correctly. A Picture & Fixed Window with a Miami-Dade NOA is only as good as the installation behind the permit. An improperly flashed or under-anchored frame compromises the entire rated system, which is why this is not a handyman product. We know what the Miami-Dade, Coral Gables, and county-specific reviewers look for because we’ve answered their comments for years on this exact product type.

Frequently Asked Questions - Picture & Fixed Windows

What wind zone or design pressure is the Picture & Fixed Window rated for? Design pressures are matched to your specific wind zone up to +/-100, never higher. We quote the panel from the NOA and Florida Product Approval documentation for your exact size and configuration, so the rating on your quote matches what your permit set shows. Call (561) 489-4036 with your address and opening size for the specific rating.

What is the lead time for Picture & Fixed Windows in Miami? Typical lead times run several weeks depending on the manufacturer line (PGT, CGI, CWS, ES Windows, ECO, or Mr-Glass), panel size, and glass package selected. Custom sizes and Low-E or tinted options add time over standard clear laminated stock. We give you a written lead time at quote so your contractor can schedule around it.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal? In Miami-Dade and most HVHZ jurisdictions in the area, yes. The building department will ask for the NOA or FL Product Approval for the exact window configuration you’re installing. We pull the current documentation for your specific panel as part of our quote package so there’s no scramble at permit submittal. Call (561) 489-4036 and we’ll verify what your municipality requires.

Can I customize the size or configuration? Sizes are customizable up to 120″ wide for the fixed panel, subject to the design pressure your wind zone imposes. Glass upgrades, frame material, and color are selected at quote. If the panel needs to pair with operable units on either side, we’ll spec the full elevation as one system so every opening carries matching NOA documentation.

How do I maintain the frame and glass on a fixed window? Wash the glass with mild soap and water, and clean the frame with the same. Twice a year, check the perimeter sealant for cracks, gaps, or separation from the stucco, especially on coastal exposures where salt air accelerates wear. If the frame or seal takes a hit during a storm, have us inspect it before the next season. Fixed windows have no tracks or sashes to service, which makes them the lowest-maintenance impact product we install in Miami.

Get a Quote - Picture & Fixed Windows in Miami

Tell us your rough opening sizes, your neighborhood, and which view you’re framing. We’ll pull the right NOA documentation for the configuration, spec the glass and finish, and give you a written line-item quote for the project. Call (561) 489-4036 to schedule a free on-site measurement in Miami, FL.

Written by the team at TruePane Windows & Doors, serving Miami, FL and the surrounding South Florida coast.