CGI Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

CGI Shingle, Tile & Metal Roofing in Miami: What to Know First

CGI shingle, tile and metal roofing in Miami is work we handle as an independent CGI service provider, not as a factory-authorized dealer. Most CGI roof repairs and replacements take one to three days on site, and we quote every job with a written line-item price before any work begins. If you own a CGI roof in Miami and it’s leaking, lifting, or showing its age, call (561) 489-4036 and we’ll schedule a straight estimate with no guesswork on the bill.

Call (561) 489-4036

This page is for homeowners in Miami who bought a CGI roof because they wanted hurricane-rated performance, and now need someone who actually knows the product line, its fasteners, its flashing details, and where it fails after a decade of salt air. We’re TruePane Windows & Doors, led by Dale Kessler, and we’ve been serving South Florida homeowners long enough to know that a roof is only as good as the person who puts it on and the person who comes back when it needs work.

How CGI Products Fail - and How We Fix Them

• CGI Sentinel Shingle lifting at the eaves. In Miami’s afternoon thunderstorms, we regularly see CGI Sentinel shingles curl or lift at the eave line within eight to twelve years. The cause is almost never the shingle itself. It’s the underlayment wicking moisture from a clogged drip edge, or the starter course installed with the wrong overhang in the first place. We pull the affected courses, correct the drainage plane, and refasten with the proper ring-shank nails at the manufacturer’s specified pattern.
• CGI Barcelona Tile cracked along the nail line. Miami roofers who don’t know CGI tile will drive fasteners too deep, and the barrel profile cracks right at the nail bed within a few seasons of thermal cycling. We see this on CGI Barcelona tile more than any other line we service. The fix is a full tile replacement with fasteners set to depth, not torque, and a foam adhesive bed that lets the tile move without stressing the fastener hole.
• CGI Encore Metal panel oil-canning after installation. Encore panels are thin-gauge standing seam, and Miami’s heat plus an installer who overtightened the clip screws produces that wavy, oil-canned look homeowners hate. We correct it by releasing the clips, re-spacing the panel laps, and re-securing to the manufacturer’s clip spacing. It’s time-consuming work, but the panels go flat and stay flat.
• CGI tile valley flashing corroding at the salt line. We see this from Brickell to Coconut Grove. Standard galvanized valley metal under CGI tile rots out in five to seven years of salt exposure. OEM replacement valleys are fine, but we prefer a heavier-gauge aluminum or stainless valley specified for coastal Miami, then re-bed the tile. The roof looks original, but it sheds water the way it should.
• CGI shingle seal strips failing on low-slope sections. In Doral and Westchester, plenty of homes have low-slope sections where the CGI shingle seal strip never fully engages. Wind-driven rain gets under the shingle and into the deck. We re-seal with an adhesive approved for CGI’s asphalt composition, and on slopes under 2:12 we’ll recommend a transition to membrane rather than fighting physics.

Our CGI Shingle, Tile & Metal Roofing Process

1. 1
   Call and inspection. You call (561) 489-4036. We schedule a visit, walk the roof, and photograph every area that’s failing. We measure the roof twice. We don’t quote off satellite images.
2. 2
   Written diagnosis. We put the findings on paper: what’s leaking, why it’s leaking, what the fix requires, and what it costs. No verbal estimates, no surprise line items later.
3. 3
   Parts decision. For visible finishes, we use OEM CGI materials when available. For flashings, underlayment, and fasteners, we may recommend a stronger aftermarket product and explain why in writing. You approve every part decision before we order.
4. 4
   The repair or replacement. Our uniformed, background-checked technicians do the work. We work section by section, keep the roofline clean, and never leave a tarp on a Miami roof overnight unless weather forces it.
5. 5
   Test and verify. We water-test the repaired areas, check every fastener and seal, and walk you through before-and-after photos.
6. 6
   The Done Right guarantee. Every job is covered by our 90-Day Done Right Promise. If it’s not right, we make it right, no paperwork fights, no arguing. The Keystone Standard applies to roof work the same way it applies to every window and door we install.

What CGI Shingle, Tile & Metal Roofing Costs in Miami

CGI roof work in Miami runs a wide range because the roof types are different animals. A shingle repair on a small leak runs $350 to $900. A tile repair with replacement barrels and valley work runs $700 to $2,200 depending on how many tiles come up. Metal panel correction or section replacement runs $1,100 to $3,800. Full re-roofs run $12,000 to $38,000, with tile and metal on the high side of that range.

What moves the price: roof slope, number of stories, how much flashing needs replacement, and whether we’re matching existing CGI material or replacing whole sections. We give every Miami homeowner a written, line-item quote before work starts. Call (561) 489-4036 to schedule your free estimate and get a real number for your roof.

Why Miami Homeowners Call TruePane Windows & Doors for CGI Work

We’re a second-generation glazier’s company that has been serving local communities for over 42 years. Dale Kessler grew up in a glazing shop in Columbus, Ohio, then put in nearly two decades of hands-on install work before TruePane took on South Florida. He reads a rough opening carefully before ordering glass, and he reads a roof the same way. Our technicians are background-checked and uniformed, and they treat a customer’s home the way they’d treat their own mother’s house.

We service CGI alongside PGT, CWS, ES Windows, and ECO Window Systems, so if your Miami home has mixed brands, we can handle the whole job in one visit. And we put everything in writing. Measure twice, order once, and put everything in writing. That’s how we’ve always worked, and it’s why homeowners keep our number.

FAQs