Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Impact Garage Doors: The Miami Owner’s Guide
We stock and install CGI-compatible impact garage doors throughout Miami, with most replacements running between $2,800 and $6,500 installed depending on size, finish, and whether the tracks and hardware need replacing too. Common tell that a CGI door is failing: it binds on one side during operation, the panels show hairline cracks near the reinforcement stiles, or the door no longer sits flush against the weatherstripping after a storm. Owners usually notice the misalignment first, then the draft, then the water line creeping across the garage floor after a hard rain. If any of that sounds familiar, we can get a technician out to measure and quote the same week you call.
Which CGI Models This Applies To
CGI builds impact-rated garage doors across several series lines, and the parts are not always interchangeable between them. The residential workhorses here in Miami are the Estate Collection, Boca Raton Series, Key West Series, and the Clopay-CGI co-branded lines that show up in a lot of newer Dade County construction. The compatibility gotcha: each series uses a distinct reinforcement profile behind the panel face, so a bottom retainer from an Estate door will not seat correctly on a Key West panel even if the width matches. The panel label, usually a foil sticker on the inside edge near the bottom section or the top of the first intermediate stile, carries the series code and the Miami-Dade NOA number. Matching that label, not just the door’s overall width and height, is what separates a clean install from a door that fights the tracks for the rest of its life. We pull panels and hardware by that label every time, because guessing on a wind-rated door is how you end up with a homeowner filing a claim for a door that was never right to begin with.
On the OEM versus aftermarket question: CGI’s own replacement sections, track assemblies, and bottom retainers hold their Miami-Dade rating paperwork in order, which matters when an insurance adjuster is looking for documentation. Quality aftermarket equivalents exist for some parts, rollers, hinges, weatherseals, and we install them where they perform. But for the panel sections and reinforcement stiles, we order CGI OEM and register the warranty in writing as part of the job.
Signs Your CGI Impact Garage Door Is Failing
- Binding or grinding on one side during travel. This usually points to a failed roller carrier or a hinge that has pulled loose from the reinforcement stile, a common issue on Miami doors that see frequent high-wind cycles. The door keeps working, but the frame is taking stress it was never meant to carry.
- Visible hairline cracks along the panel face or stile lines. Salt air and UV exposure in Miami do not crack CGI panels on their own, but a panel that has taken a glancing blow from storm debris will start showing stress fractures. Once the face skin separates from the reinforcement core, the panel loses its impact rating even if the door still opens.
- Door no longer seals against the floor or side jambs. The bottom retainer on a CGI door holds a two-stage impact weatherseal. When that retainer bends, usually from a garage floor that has shifted or a track that has come out of square, you will feel the draft and see the water line after a storm.
- Visible corrosion on the track and hardware. Miami’s salt air works on galvanized and even powder-coated track components. Surface rust is cosmetic, but corrosion at the bracket mounting points or on the torsion tube is structural and means that hardware is nearing replacement.
- Door sags in the center when partially open. This is the torsion spring or cable system losing tension. It is subtle at first, a slight dip you notice from the street, but it means the weight of the door is no longer properly counterbalanced, which puts the opener and the pulleys under load they were never sized for.
Replacement Cost & What’s Included
Installed replacement for a CGI impact garage door in Miami runs from about $2,800 for a single-car door with standard hardware up to $6,500 or more for a larger two-car door with insulated glass, custom finish, and full track replacement. The three factors that move the price in this market are panel count and finish grade, whether the torsion assembly and tracks can be reused or need replacing, and whether the opening itself needs the jambs re-shimmed to bring everything back into square, which is more common in older Miami homes than people expect. Every quote we write is a fixed number with parts and labor separated line by line. The 90-Day Done Right Promise covers the entire installation, and both the CGI manufacturer warranty and our workmanship warranty are registered in writing before our truck leaves the driveway.
DIY or Call Us?
There are things an owner can safely check: whether the rollers are visibly worn, whether the weatherseal is torn or pulled loose from the retainer, whether the track bolts have backed out. Then there is everything above the spring line. The torsion assembly on a CGI impact door is under enough tension that a spring that lets go can take a hand, a wrist, or worse with it. That is not a scare line, it is the same thing I tell my own neighbors. High-tension springs and cables are not a homeowner repair, period, and even a door that is “only binding” usually needs the opening re-measured and the tracks brought back to true before new panels will travel cleanly. If you want us to look at it, call (561) 489-4036 and we will send a technician who measures twice and orders once.
FAQs
A properly maintained CGI door in Miami will give you 15 to 20 years of service, with the springs and cables needing replacement somewhere around the 8-to-10-year mark. Salt air and high-wind exposure shorten that window if the hardware is left unmaintained, so annual track cleaning and hardware inspection makes a measurable difference. Call (561) 489-4036 if you want a straight answer about whether your door can go a few more seasons or has hit the point where replacement is the honest choice.
Individual panels can sometimes be replaced rather than the whole door, but once a CGI panel face has cracked or separated from its reinforcement core, the impact rating on that panel is gone and no amount of bonding will restore it. The decision comes down to whether the panel series is still in production and whether the cost of a single replacement section makes sense against the age of the rest of the door. We will quote you both ways and let you decide with the numbers in front of you.
Most straightforward CGI garage door replacements go in during a single visit, typically four to six hours including removing the old door, setting the new tracks, and hanging and balancing the new panels. Custom finishes or doors with integrated opener reconfiguration can stretch that to a follow-up visit, which we will tell you before we schedule, not after. Call (561) 489-4036 for an exact timeline on your door.
We keep common CGI rollers, hinges, bottom retainers, weatherseals, and torsion hardware on our trucks, so a parts repair can often be handled the same day. Panel sections are ordered by series and size from CGI, which means a lead time of one to two weeks for most residential replacements in the Miami area. We will register the warranty on the replacement parts in writing when the job is done, the same as we do on full door installs.
Call TruePane for a Straight Quote
If your CGI impact garage door is binding, leaking, or showing panel cracks, call us at (561) 489-4036. We will talk through what you are seeing, tell you honestly whether it is a parts job or a door replacement, and give you a fixed written quote before any work is scheduled. TruePane Windows & Doors is an independent service provider, not affiliated with CGI, but we install and service their doors throughout Miami. We also stock parts for PGT, CWS, and ES Windows when we are already on site. A live person answers the phone every time.
Written by Dale Kessler, Owner, TruePane Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.