Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Door Installation: The Miami Owner’s Guide
CGI door installation in Miami typically runs $425 to $1,850 installed, depending on whether we’re replacing a worn roller assembly, a sprung hinge, weatherstripping, or a full door slab and frame. We stock the common CGI hardware on our trucks, so most door repairs are completed the same day we show up. What usually brings a homeowner to this page is a door that has started dragging on the threshold, a deadbolt that no longer lines up, or a door that shudders when the wind hits it hard along Brickell or Coconut Grove. You have a CGI product in place precisely because it’s built for Florida. When the installation around it fails, that product can’t do its job.
TruePane Windows & Doors is an independent service provider, not affiliated with CGI. We work on CGI doors daily, and we’ve learned exactly where they excel and where installation details matter most in Miami’s salt air and storm season.
Which CGI Models This Applies To
CGI manufactures entry doors, French doors, and sliding glass doors across several product families. The most common lines we service in Miami are the Estate Collection, the Tuscany Series, and the Classic Collection entry systems, along with CGI Sentinel sliding doors. The part you’ll see referenced on the door’s edge label or top rail matters more than the marketing name. Look for a small identification sticker or laser etching, usually on the hinge-side edge of the door slab. It will list the series code, glass type, and in many cases the manufacturing date.
Here’s a compatibility detail that saves people money: CGI hinges are not all interchangeable. The Estate Collection uses a heavier-gauge stainless hinge with a different screw pattern than the Tuscany Series, and swapping one for the other can leave the door out of alignment within weeks. When we quote, we confirm the series before we order or pull from stock. For most CGI doors built after 2012, the original hardware is available through CGI’s distribution network. For older models, a quality aftermarket equivalent from a name like Truth Hardware or G-U often performs as well as OEM, and we’ll tell you plainly when that’s the case and when it isn’t.
Signs Your CGI Door Installation Is Failing
- The door binds at the top corner during summer. Miami’s humidity swells wood frames and shifts concrete slabs. A door that was set true in January may catch by August if the reveal was cut too tight. This is an installation issue, not a door defect.
- The deadbolt misses the strike plate by a quarter inch. CGI slabs are heavy, usually 180 pounds or more. When hinge screws strip or the hinge itself fatigues, the door sags. A deadbolt that requires lifting the handle means the weight is no longer carried properly.
- Daylight shows along the weatherstripping. That gap lets water in during Miami’s sideways rain and lets conditioned air pour out eleven months of the year. It also means the door is not seating against the jamb the way it should.
- The door shudders or hums during high wind. CGI doors are engineered to take a storm. If the slab is rattling in the frame, the problem is almost always worn rollers, loose adjustment blocks, or a failing astragal on a French pair.
- The threshold is cracked or pulling away from the concrete. Salt air works on aluminum thresholds, and Miami’s heat cycles expand everything. A threshold that collects water or traps the sweep is false economy to ignore.
Replacement Cost & What’s Included
Here’s what we charge for the most common CGI door installation repairs in Miami right now:
- Roller assembly replacement (sliding doors): $425 to $640, including labor and hardware.
- Hinge replacement (entry doors): $380 to $690, depending on count and whether we’re re-machining the frame.
- Full threshold replacement: $590 to $1,110, including removing the old threshold, repairing any corroded substrate, and resealing.
- Weatherstripping and sweep replacement: $260 to $450, using marine-grade materials suited to salt exposure.
- Complete door slab installation: $1,450 to $4,900, depending on glass package, series, and whether the frame needs rebuilding.
Every quote we give in Miami is a line-item written estimate before any work begins. The Keystone Standard means both manufacturer warranty layers get registered in writing, durations stated, before our truck leaves your driveway. Our workmanship is covered by the 90-Day Done Right Promise. If the door isn’t right, we make it right, no paperwork fights and no arguing.
DIY or Call Us?
There are things a homeowner can safely check. Confirm the hinge screws are tight. Look at the weatherstripping for tears. Note whether the door only binds in certain weather. None of that requires a service call. What we’d ask you not to attempt is removing a heavy CGI door from its hinges or adjusting a French door astragal without knowing how the weight is supported. These slabs are heavy enough to cause serious injury if they come off the frame unexpectedly, particularly a wind-rated CGI model with laminated glass. We pull doors off their hinges with a second set of hands and jack support, every time. If the job is beyond a loose screw, call us at (561) 489-4036. Dale Kessler’s rule applies to doors the same as panes: measure twice, order once, and put everything in writing. We’ll measure, quote, and stand behind the work.
FAQs
In Miami’s salt and heat, we see properly installed CGI door hardware last twelve to eighteen years before it needs meaningful service. The door itself is built to last decades. Weatherstripping and rollers are wear items, and coastal homes within two miles of the water should expect to replace them more often than homes further inland. Call (561) 489-4036 and we can tell you what to expect for your specific location.
In most cases, yes. We repair or replace the failing hardware: hinges, rollers, thresholds, weatherstripping, locking hardware, and astragals, without replacing a door slab that is still structurally sound. Full door replacement is only the right call when the frame is rotted, the slab has been compromised, or the homeowner wants to upgrade glass packages.
Most hardware replacements on a CGI door are completed in two to four hours, and we come with common parts stocked on the truck. A full slab and frame replacement can take one to two days depending on the condition of the rough opening. We’ll give you a written timeline before work starts.
We keep the most common CGI rollers, hinges, thresholds, and weatherstripping stocked on our trucks, which is why most door service calls in Miami are completed in a single visit. Oddball sizes or older series parts sometimes need to be ordered, and we will tell you the lead time honestly before you commit to anything.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.