French & Double Doors

French & Double Doors in Miami, FL | TruePane Windows & Doors

French and double doors bring something no sliding panel can: symmetry, wide-open passage, and a clear sightline from inside to outside. In Miami, that openness has to earn its place against wind, rain, and flying debris. TruePane Windows & Doors supplies and installs paired impact-rated French doors with laminated glass in every lite, built to Florida Building Code High-Velocity Hurricane Zone requirements. We handle the product selection, permitting paperwork, and the installation itself across Miami-Dade County. If you’re replacing old, non-impact French doors or planning a new opening, call (561) 489-4036 to talk through your options.

Call (561) 489-4036

Product Overview - French & Double Doors

French doors are the traditional choice for openings that lead to a patio, terrace, balcony, or courtyard. Where a single door feels narrow and a sliding door feels contemporary, a paired French door set reads as intentional architecture. For Florida homes, the catch has always been performance. Older French doors with thin glass and weak center joints were among the first things to fail in a storm. That’s exactly what the impact-rated version of this product is designed to correct.

Our French and double door profiles are engineered around laminated impact glass in every lite. There’s no weak pane, no decorative glass that gets special treatment. Each lite carries a PVB interlayer that holds the glass in the frame under impact. The frame itself is built in aluminum or vinyl, with multi-point locking hardware that secures the active and passive door panels at the top, bottom, and center. That hardware matters in Miami, where wind pressure can push against a door for hours during a storm. A single-point lock simply cannot hold the panels flush the way a multi-point system can.

What makes these doors feel right in a South Florida home is the balance between proportion and toughness. The paired panels create symmetrical sightlines, so the opening feels centered and deliberate. At the same time, the engineering underneath is unmistakably hurricane-grade. TruePane Windows & Doors installs these systems across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so we can match the right frame profile and price point to your Miami home without pushing you into a product that doesn’t fit.

Technical Specifications

Here’s what the French and double door profile offers in terms of size, materials, and performance. We’ve kept the numbers straightforward. What they mean for your Miami home is covered in the sections below.

• Frame materials: Aluminum or vinyl. Aluminum is our most common recommendation for coastal Miami because of its stiffness and narrow sightlines. Vinyl is the thermal and budget-friendly alternative that still meets impact requirements.
• Maximum size: Up to 96 inches wide for a paired door system, subject to design pressure requirements for your specific wind zone.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, and clear glass.
• Finish options: White, Almond, Bronze, Black, and Tan.
• Sill options: Standard ADA-compliant low-profile sills or raised sill profiles depending on existing floor conditions and water-management needs.
• Locking hardware: Multi-point locking on the active panel with flush bolts on the passive panel, finished to coordinate with the frame color.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration. Engineered to FBC HVHZ requirements.

Hurricane & Compliance Performance

This is the section that matters most for Miami buyers. Every claim below traces back to how the product is built, tested, and rated. We don’t guess on this stuff. The paperwork either exists for your configuration or it doesn’t, and we verify it before quoting.

Laminated Impact Glass

Every lite in these French doors uses laminated glass with a PVB interlayer. Under impact, the glass may crack but the interlayer holds the pieces in the frame. That’s the difference between a broken window and a window that keeps the envelope intact throughout the storm.

Miami-Dade NOA / Florida Product Approval

Each door configuration carries its own Notice of Acceptance or Florida Product Approval number. These are issued per frame size, glass make-up, and hardware set. TruePane Windows & Doors verifies the specific numbers before we quote your project in Miami, so your permit application doesn’t stall.

FBC / HVHZ Compliance

The High-Velocity Hurricane Zone portion of the Florida Building Code is the most demanding code in the country. These French doors are engineered to meet HVHZ requirements, not just the base Florida Building Code. For a Miami address, that’s the difference between a product that’s allowed here and one that isn’t.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. The doors we sell and install in Miami have product approvals issued under this testing framework.

Design Pressure for Your Wind Zone

Design pressure is a PSF rating, not a wind speed. It varies by wind zone, building height, and opening location on the structure. Our French and double door systems carry design pressures matched to your wind zone, up to +/-100, never higher. We match the product to your specific Miami property rather than selling one rating to everyone.

Energy Performance

For Miami’s cooling-driven climate, Low-E insulated glass is available in these doors. That option reduces solar heat gain while the laminated impact layer provides the storm protection. Tinted and clear laminated glass are also available depending on your light preferences and HOA requirements.

Color & Glass Options

Miami homes lean hard into a few distinct architectural personalities: white stucco Mediterranean, warm coral and terracotta, modern gray and glass. The finish options for these French doors line up with those palettes.

White is the default for traditional Miami Mediterranean homes, particularly where trim work and pergolas are already painted white. Almond and Tan sit comfortably on warmer stucco and work well when the home has beige or sand tones. Bronze and Black read more contemporary, and they’re popular on newer construction from Coconut Grove to Edgewater where darker frames add contrast against light walls. The finish itself is a factory-applied coating on aluminum, designed to hold up against coastal UV and salt air without fading to chalk in a few seasons.

Glass choice depends on what the door faces. Clear laminated impact glass keeps the view as natural as possible. Tinted laminated glass reduces glare and some heat for west-facing openings. Low-E insulated glass is the right pick for doors that get direct afternoon sun, because it cuts solar heat gain before it ever reaches your cooling load. For paired doors on a covered loggia, clear glass usually makes the most sense.

Installation by TruePane Windows & Doors in Miami

A hurricane-rated French door is only as good as its installation. A product with a valid Miami-Dade NOA can still fail if it’s set out of level, shimmed incorrectly, or sealed with the wrong perimeter product. That’s why TruePane Windows & Doors treats installation as part of the rating, not a separate trade.

Our process starts with a pre-installation inspection. We check the rough opening for square, verify the substrate for signs of water damage or rot, and confirm that the existing flashing details make sense for the new door. Then we set the frame level, plumb, and square. A French door that’s out of square will bind at the center stile, the multi-point hardware won’t engage fully, and the air and water seal suffers. We don’t let that happen.

Perimeter sealing follows AAMA 812 practice using low-expansion foam, the correct product for door and window rough openings where expansion pressure can distort frames. Flashing and sill details are tied into the existing water-resistive barrier so water that gets past the exterior finish doesn’t find its way inward. The overall installation follows AAMA 2400/2410 standard practice for fenestration installation.

Miami-specific realities matter here. Coastal exposure changes wind pressures. Some neighborhoods in South Dade sit in different wind zones than inland Coral Gables or Palmetto Bay. The permitting jurisdiction matters too: Miami-Dade County enforces HVHZ requirements down to the permit drawing level. We know what the local building departments expect to see on an NOA submittal, and we make sure your door’s paperwork lines up before the inspector arrives.

After the door is set and sealed, we run a water test, cycle the panels, verify the multi-point locking engagement, and clean the site. You get a door that opens the way a French door should, and closes the way a hurricane-rated door has to.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Miami

French doors in Miami have to do two jobs at once: open beautifully and close like a vault. The right product and the right install make both possible. Call TruePane Windows & Doors at (561) 489-4036 to schedule a free on-site measurement and get a written, line-item quote for your French or double door project. We’ll verify the NOA, confirm your design pressure, and walk you through every step.

Written by the team at TruePane Windows & Doors, serving Miami, FL.