Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Entry Doors in Miami, FL
A new entry door in Miami typically costs between $1,200 and $4,800 installed, depending on material, glass content, and impact-rating requirements. Most single-door replacements are completed in one visit, and every job TruePane Windows & Doors completes is covered by The Keystone Standard – both manufacturer warranty layers registered in writing before the truck leaves the driveway, plus our 90-Day Done Right Promise on workmanship.
If your front door has been binding since the last rainy season, if the weatherstripping has given up, or if you are finally replacing that 1980s hollow-core with something that actually matches what your home has become over the past three decades – this is the page for you. We handle the full process: measuring the rough opening, sourcing the door through our Door Installation services, pulling any required permits through Miami-Dade’s building department, and setting the unit plumb and square the first time. Because if the pane is not true, the job is not done.
We are an authorized installer for Therma-Tru and Pella, among more than a dozen other manufacturer lines, and we quote them side by side on paper so you see exactly what you are buying before a single screw is turned. For the full scope of what we do with doors in this market, visit our Door Installation in Miami page. To talk through your project now, call us at (561) 489-4036 – a live person answers every call, around the clock.
When You Need Entry Doors
Some situations are obvious. Others sneak up on a homeowner who has been meaning to deal with something for two or three years. Here is what we see regularly in Miami and the surrounding neighborhoods:
- The door no longer closes squarely in summer. In Miami, a door that binds every June and July is not just a nuisance – it is usually telling you the frame has shifted, the slab has expanded beyond tolerance, or the original install was never truly plumb. Coral Gables and Coconut Grove homes built in the 1960s and 1970s are particularly prone to this because the underlying frames were set before modern moisture barriers were standard practice.
- Your door does not meet Miami-Dade’s impact requirements. Miami-Dade County has some of the most demanding wind-load codes in the country – NOA (Notice of Acceptance) approval is not optional for replacement doors in this market. If your current door was installed before the post-Andrew building code overhaul, there is a real chance it would not pass a current inspection, and your insurer may already know it.
- Visible rot, rust, or frame deterioration. Miami’s humidity and salt air are hard on door frames. Fiberglass and steel doors that were not properly sealed at installation – especially at the sill – absorb moisture at the bottom rail and begin to fail from the ground up. By the time you see soft spots, the frame itself often needs replacement too.
- Energy bills that do not match the rest of your upgraded home. If you replaced your windows and insulated the attic but the front door still has a half-inch gap at the threshold, you are losing conditioned air on every hot afternoon. A properly set, gasketed entry door makes a measurable difference in a Miami home that runs the AC eight or nine months of the year.
- Glass sidelights or transom panels that are fogged or cracked. Many Miami entry doors include decorative glass panels. When the seal fails on those insulated units, you get condensation between the panes that will not clear. We replace sidelights and transom glass as part of a door replacement or as a standalone repair, and we register the glass warranty separately under The Keystone Standard.
- You are remodeling or selling, and the current door undermines the rest of the work. Homeowners in Pinecrest, South Miami, and the Roads neighborhood who have updated kitchens, bathrooms, and landscaping often tell us the front door is the one thing that doesn’t match. A Therma-Tru or Pella fiberglass door in the right profile and finish resolves that without the maintenance overhead of a real wood door in this climate.
Our Entry Doors Process
We have been doing this long enough – over 42 years as a company and a craft tradition that goes back a generation before that – to know where installations go wrong. Most problems trace back to shortcuts in the first three steps. Here is how we work:
- Measure the rough opening, then measure it again. Our technicians measure the existing opening in at least six points: width at top, middle, and bottom; height at left, center, and right. Miami homes that have settled over decades rarely give you a perfectly rectangular opening. We record every number on paper, note any out-of-square conditions, and account for them in the door unit we order. No guessing, no rounding to the nearest half-inch.
- Side-by-side manufacturer quotes on paper. Once we have the measurements and know your material preference – fiberglass, steel, or wood – we pull quotes from the authorized lines that fit your opening and your budget. We have done this with Therma-Tru for years, and their fiberglass profiles hold up in Miami’s climate better than most. We show you the options on paper, with warranty durations stated plainly, before you commit to anything.
- Permit coordination through Miami-Dade Building and Zoning. Entry door replacements in Miami-Dade frequently require a permit, particularly when the new door carries a different NOA number than the original or when structural modifications to the rough opening are needed. We handle that process. You do not chase inspectors or fill out forms – we do it, because an unpermitted door replacement can complicate a future sale and, more immediately, can void both the manufacturer warranty and your homeowner’s insurance claim if you ever need it.
- Removal, frame inspection, and proper prep. When the old door comes out, we inspect the rough framing, the sill pan, and the surrounding drywall or stucco for moisture damage before anything new goes in. In Miami, skipping this step is how an installer causes rot to continue behind a brand-new door. If we find damage, we tell you what we found, show you, and give you a square-deal price to address it before we proceed.
- Installation plumb, level, and shimmed correctly. The door unit goes in plumb on all four sides. We shim at hinge and strike locations, not just at corners. The threshold is set and sealed to the sill pan. Every gap at the perimeter gets backer rod and appropriate sealant for the substrate – caulk choices differ between a wood-frame wall and a CBS (concrete block structure) home, and most of Miami’s single-family stock is CBS. Getting that detail wrong is how water finds a path behind the frame inside of two rainy seasons.
- Warranty registration before we leave. Both manufacturer warranty layers – the door unit itself and the glass package if applicable – are registered in your name before our truck pulls out. You receive written confirmation with durations stated. That is The Keystone Standard, and it applies to every job, not just the larger ones. If anything is not right in the first 90 days, call us and we make it right. No paperwork fight, no fine print to argue over.
Entry Doors Pricing in Miami
Entry door replacement in Miami runs higher than the national average for two reasons: impact-rating requirements add cost to the door unit itself, and Miami-Dade’s permitting process adds time and coordination that less regulated markets don’t carry. That said, the range is wide enough to fit most situations. Here is a plain breakdown of what we typically see:
| Door Type / Scenario | Typical Installed Range (Miami) |
|---|---|
| Steel entry door, impact-rated, standard size | $1,200 – $2,200 |
| Fiberglass entry door (e.g., Therma-Tru), impact-rated | $1,800 – $3,400 |
| Fiberglass or wood with sidelights, impact-rated | $2,800 – $5,500 |
| Double-door (French entry), impact-rated | $3,500 – $6,500+ |
| Frame repair or partial frame replacement (add-on) | $300 – $900 |
| Permit coordination (Miami-Dade) | Included in our quote |
What moves the price: the door’s impact-rating and NOA approval level, the amount of glass in the unit (decorative glass sidelights and transoms carry their own cost), the condition of the existing frame, and whether the rough opening requires modification. A fiberglass door with full sidelights and a transom on a home in Coral Gables costs more than a Replacement Doors steel unit on a standard opening in Hialeah – and both are legitimate jobs done right.
Seniors and veterans receive a permanent 5% discount on every job. If your total repair work runs over $250, ask about the $50 off any repair over $250 offer when you call. Estimates are free and the quote you receive is the price on the invoice – no surprise line items, no second trip to renegotiate.
Call (561) 489-4036 to schedule a free in-home measurement and quote. We’ll bring the manufacturer spec sheets and show you the options side by side.
FAQs – Entry Doors
Do I need a permit to replace my entry door in Miami?
In most cases, yes – Miami-Dade County requires a permit for entry door replacements, particularly when the new door carries an NOA approval number, when the opening is being modified, or when the home is in a historic district. The permit process protects you: an unpermitted door replacement can surface during a home sale or complicate an insurance claim after a storm. TruePane handles permit coordination as part of every qualifying project. You won’t be chasing the building department yourself. Call us at (561) 489-4036 and we’ll tell you upfront whether your specific job requires a permit and what that adds to the timeline.
How much does a new entry door cost in Miami?
A single impact-rated entry door installed in Miami typically runs between $1,200 and $3,400, depending on material and glass content. Steel doors at the lower end of that range, fiberglass units like Therma-Tru in the middle to upper range, and French & Double Doors or sidelight configurations starting around $2,800. Frame repairs, if needed, add $300 to $900. Permits are included in our quote. For an exact number on your specific opening, call (561) 489-4036 – the estimate is free and the quote you get is the price you pay.
What is the best door material for Miami’s climate?
Fiberglass holds up best in Miami’s combination of heat, humidity, and salt air. Unlike wood, fiberglass does not expand, contract, or rot when exposed to sustained moisture. Unlike steel, it does not rust when the factory finish gets scratched near the coast. Therma-Tru’s fiberglass line, which we install regularly in Coconut Grove, Palmetto Bay, and along the Biscayne corridor, has proven durable in this market over many years. Hurricane-Proof Front & Entry Doors in steel are a solid choice at a lower price point when properly primed and painted and protected by a covered entry. We’ll tell you plainly which makes sense for your location and how your home is oriented – that’s part of the free estimate.
How long does entry door installation take?
Most single entry door replacements are completed in one visit, typically four to six hours for the installation itself. If the rough opening needs structural modification or significant frame repair, add time – we’ll tell you before we start. Permit processing in Miami-Dade adds lead time before the install date; that typically runs one to two weeks depending on the county’s current volume. We schedule the inspection and handle the closeout. From the time you sign off on the quote to the time the job passes inspection, most projects in Miami are fully complete within two to three weeks. Call (561) 489-4036 and we can give you a tighter timeline based on your specific situation.
Key Takeaways
- Entry door replacement in Miami requires impact-rated, NOA-approved units in most cases – TruePane handles permit coordination as part of the job.
- Installed prices typically run $1,200 to $3,400 for a single door and up to $6,500 for double-door configurations with sidelights.
- Fiberglass performs best in Miami’s climate – Therma-Tru is one of the lines we quote regularly and install as an authorized installer.
- Every job is covered by The Keystone Standard: both warranty layers registered in writing before the truck leaves, and a 90-Day Done Right Promise on workmanship.
- Seniors and veterans receive a permanent 5% discount. Estimates are always free.
- A live person answers at (561) 489-4036 around the clock – not a callback form, not a voicemail tree.
If you are ready to stop dealing with a door that binds in July, drags air-conditioned air out through a failing threshold, or simply no longer reflects what your home has become – call (561) 489-4036. Dale Kessler and the TruePane team will measure the opening, show you the options on paper, and do the job the way it was meant to be done the first time. Our work on home entry doors across Miami speaks for itself, and we stand behind it in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After